PPE公司的產品目前主要應用在能源、石化裝備、LNG、科研、汽車引擎（氫氣項目）、工程器械液壓系統、船舶制造、儀器設備、儲存罐、高壓測試儀器、燃燒控制系統、氣體壓縮系統、飲料罐裝設備電磁閥等領域；PPE產品擁有：微型（zui大只有幾厘米大）、耐高壓（特殊可以達到10000PSI）、防爆（UL\CSA防爆認證）、低功耗（zui小功耗0.5W）等優勢。從應用功能分為：防爆、高壓、自保持式、噴射式、旋轉式等專業電磁閥。
制氫制氧設備電磁閥部分型號參數如下：
SPECIFICATIONS
SERIES 20—MODEL H22
Three-way normally closed valve for high pressure applications. Valve
must be mounted within 30° of vertical.
OPERATING CONDITIONS
?Media: Air and other non-corrosive gases, water and oil.
Valve Temperature Range: Standard Valve-0°F（-18°C） to 104°F（40°）
ambient; 0°F （-18°C） to 150°F（65°C）
media. Optional Valves can tolerate much
higher or much lower ambient and media
temperatures. Consult factory for specifics.
Burst Pressure: 5000 PSI
Maximum Operating Pressure Differential: to 3000 PSI
?To insure trouble free operation, filtration down to 60 microns or less is recommended.
ELECTRICAL CHARACTERISTICS
Coil Voltage: 5 to 825 VAC, 50-60 Hz. 1.8 to 265 VDC
Nominal Power: H22 EH 22
A.C. 7.7 watts A.C. 7.3 watts
D.C. 9.5 watts D.C. 9.5 watts
Coil Construction: Standard valve—molded and non-molded
Explosion Proof valve–molded coil and
3rd wire ground （standard）
Typical Response Time on Air: 4-16 milliseconds
MECHANICAL CHARACTERISTICS
Body: Stainless Steel
Orifice Diameter: 1/32” - 3/32”
Porting: 1/8” and 1/4" NPT
Housing: Standard valve–1⁄?" NPT conduit and grommet
Explosion Proof valve–1⁄?" NPT conduit with 3rd
Wire Ground （EP only）
STANDARD
GROMMET HOUSING
EXPLOSION PROOF
Listings: Valves are U.L. Listed and CSA Certified for Hazardous Locations—Class I,
Div 1, Group C and D - Class II, Div 1, Groups E, F, and G; Div 2 Groups
A,B,C,D,E,F, and G.
深圳市德騰機電設備有限公司*代理美國Peter Paul 電磁閥，包括防爆電磁閥、高壓防爆電磁閥、自鎖式電磁閥、磁保持式電磁閥、低功耗電磁閥、低功率電磁閥、超高壓電磁閥、試驗零泄漏電磁閥、醫療材質用的醫療電磁閥等。
制氫制氧設備電磁閥其他型號或其他關于閥體、端口、密封、電氣連接等選項請咨詢代表處。
:屈敏
:
:qumin@diateng.com
傳真:
:
深圳市德騰機電設備有限公司
