泵閥商務網>產品庫>閥門>調節閥>電動二通調節閥>VPF 動態平衡電動二通閥/電動平衡調節閥/電動平衡閥
返回產品中心| 參考價 | 面議 |
動態平衡電動二通閥/電動平衡調節閥/電動平衡閥關斷力6.8Bar寬壓差范圍內盤管水流量精度自動恒定模數化流量工廠標定，無需現場平衡調試。電動執行器低噪運轉，安裝及拆卸十分方便電動執行器僅在動作時間15秒內耗電4VA，在全開或全關位置時機械鎖定真正零耗電一體化動態平衡電動二通閥明顯降低水系統流動噪聲，*解決水力平衡問題，綜合節能效果6%-35%。
動態平衡電動二通閥安裝說明 . 安裝前請仔細閱讀產品說明書，核對產品型號。 . 水流方向必須按照閥體上指示得方向相同。 3. 在用于風盤或空氣處理機組管路時，閥體須位于接水盤上方，以保證出現滴水時落 入接水盤中。 4. 閥體及執行器安裝于垂直方向±60范圍內，其上方應至少有30mm空間用于拆裝。 與周圍管道、設備、建筑物必須保持足夠的維修操作空間，必須安裝在維修人員通 過檢修孔能觸及到的地方。 5. 閥體安裝完畢并與管路通過試壓后才可安裝執行器。閥前需裝過濾器。 6. 所有接線需遵守國家和地方電氣規范，執行器須避免受潮。 Instructions . Read the instructions carefully, check the product model before installation. . Flow direction must be identical with the direction on the valve body. 3. When used on a pipeline of fan coil or air handling units, valves shall be located above the water tray to ensure the possible drop fall into the tray. 4. The valve and actuator are recommended to be mounted within ±60 degrees of the upright position. Above it there should be at least 30mm space for assembly and disassembly. The valve and actuator must be installed with suf?cient operating space around pipelines, equipment and buildings, and where maintenance worker can touch through the access hole. 5. The actuator can only be installed after the valve installed and pressure tested. Strainer is required before the valve. 6. All wiring must comply with local, regional, and national electrical code requirements. The actuator housing must be protected from moisture. 安裝方向/Installation direction Instructions . Read the instructions carefully, check the product model before installation. . Flow direction must be identical with the direction on the valve body. 3. When used on a pipeline of fan coil or air handling units, valves shall be located above the water tray to ensure the possible drop fall into the tray. 4. The valve and actuator are recommended to be mounted within ±60 degrees of the upright position. Above it there should be at least 30mm space for assembly and disassembly. The valve and actuator must be installed with suf?cient operating space around pipelines, equipment and buildings, and where maintenance worker can touch through the access hole. 5. The actuator can only be installed after the valve installed and pressure tested. Strainer is required before the valve. 6. All wiring must comply with local, regional, and national electrical code requirements. The actuator housing must be protected from moisture. |
| 產品名稱 | 參考價 | 地區 | 公司名稱 | 更新時間 | |
|---|---|---|---|---|---|
| 江森電動平衡調節閥 | 面議 | 上海市 | 江森自控閥門有限公司 | 2022-05-13 | 在線詢價> |
| 電動平衡閥 | 面議 | 鄭州市 | 河南上州閥門有限公司 | 2019-09-19 | 在線詢價> |
| EDRV動態電動平衡閥 | 面議 | 上海市 | 上海祝茂閥門有限公司 | 2018-07-28 | 在線詢價> |
| 動態平衡電動控制閥，電動平衡調節閥 | 面議 | 上海市 | 上海彬米閥門制造有限公司 | 2018-04-17 | 在線詢價> |
| 動態平衡電動調節閥，智能電動平衡閥 | 面議 | 上海市 | 上海彬米閥門制造有限公司 | 2018-04-17 | 在線詢價> |
| 高壓電動平衡閥（鍛件） | 面議 | 武漢市 | 武漢協特閥門科技有限公司 | 2017-11-09 | 在線詢價> |
*您想獲取產品的資料：
個人信息：
